Swage Stud Terminal & Hex Socket Tensioner Stainless Wire Balustrade Kit #64

Swage Stud Terminal & Hex Socket Tensioner Stainless Wire Balustrade Kit #64

Swage Stud Terminal & Hex Socket Tensioner Stainless Wire Balustrade Kit #64

From $6.40

To $20.28

A super neat and versatile stainless wire balustrade kit for areas supported with timber or metal posts. Comprises a swage stud terminal, hex socket tensioner and dome rod terminal. Bevelled washers available to suit stair sections. Hydraulic swaging required.

In stock

SKU
WB-SSTHEX32-K64
Hex Socket Tensioner M6 Stainless Steel 316   + $0.00
Rod Terminal 35mm for 3.2mm Wire AISI 316   + $0.00

Maximum 512 characters

For DIY purchase the wire separately here

For Factory Swaging wire the wire is purchased separately here:
7x7 3.2mm (most economical, higher stretch, rough weave)
1x19 3.2mm (stronger, least stretch, higher break load, smooth finish)

To calculate the amount of wire required:

Post-to-Post measurement x Number of runs

Example 1
Section 1: 11 runs x 3450mm; 37,950mm
Section 2: 11 runs x 5350mm; 58,850mm
Total Wire 96,800mm = 96.8 metres.
Add 97m to your order (Total Rounded Up)

Please Note: Any leftover/offcut wire for factory swaging will not be supplied. Any additional wire required should be purchased/ordered separately.

Current Factory Swaging Lead Time: 1 week

Swage Stud Terminal & Hex Socket Tensioner Stainless Wire Balustrade Kit #64
Swage Stud Terminal & Hex Socket Tensioner Stainless Wire Balustrade Kit #64

In stock

$6.40

Items Included:

    Slimline stainless steel wire balustrade kit.

    Pre-drill your post holes.

    Insert the wire rope into the swage fittings at each end of your run. These fittings require a hydraulic swaging tool.

    Insert the swage stud terminal into the hex socket tensioner and tighten with an allen key.

    For angled sections such as stairs, the 6mm x 37 degree bevelled washers supports the Rod Terminal and the 8mm x 37 degree bevelled washer supports the Hex Socket Tensioner. This results in a smooth, seamless wire balustrade run.

    For stair sections with thicker posts such as 90 x 90mm or more, choose the 75mm swage stud terminal.

    For the 4.0mm kit click here

    More Information
    Product Material Stainless Steel 316
    Swaging System Hydraulic Swaging
    Wire Rope Diameter 3.2mm
    Product Specifications
    • 1x Hex Socket Tensioner M6 AISI 316
    • 1x Swage Stud Terminal AISI 316, 43mm Thread, 95mm Overall Length
    • 1x Rod Terminal AISI 316 - 37mm (ProRig)
    • Bevelled Washers - 8mm to suit the Hex Socket Tensioner and 6mm to suit the Dome Terminals*
    • *Please note: The ProRig Dome Terminal sits completely neat and flush with the 8mm beveled washer.
    Stock Availability In Stock
    Bulky item No
    4.7 rating from 35 reviews