Swage Stud Terminals & Rivet Nuts (RivNuts) Stainless Wire Balustrade Kit

Swage Stud Terminals & Rivet Nuts (RivNuts) Stainless Wire Balustrade Kit #62

Swage Stud Terminals & Rivet Nuts (RivNuts) Stainless Wire Balustrade Kit #62

From $5.06

To $14.54

A neat and slimline stainless steel balustrade kit for metal posts, consisting of Swage Stud Terminals (RHT and LHT) and Rivet Nuts (LHT and RHT). Hydraulic swaging required.

In stock

SKU
WB-SSTRIV32-K62

Maximum 512 characters

For DIY purchase the wire separately here

For Factory Swaging wire the wire is purchased separately here:
7x7 3.2mm (most economical, higher stretch, rough weave)
1x19 3.2mm (stronger, least stretch, higher break load, smooth finish)

To calculate the amount of wire required:

Post-to-Post measurement x Number of runs

Example 1
Section 1: 11 runs x 3450mm; 37,950mm
Section 2: 11 runs x 5350mm; 58,850mm
Total Wire 96,800mm = 96.8 metres.
Add 97m to your order (Total Rounded Up)

Please Note: Any leftover/offcut wire for factory swaging will not be supplied. Any additional wire required should be purchased/ordered separately.

Current Factory Swaging Lead Time: 1 week

Swage Stud Terminals & Rivet Nuts (RivNuts) Stainless Wire Balustrade Kit #62
Swage Stud Terminals & Rivet Nuts (RivNuts) Stainless Wire Balustrade Kit #62

In stock

$5.06

Items Included:

    This stainless steel wire rope balustrade kit is very slimline, neat and aesthetically pleasing. This kit is for those who are looking to minimise balustrade wire fitting bulk.

    Instructions

    Pre-drill your 9mm post holes for the rivet nuts.

    Using a rivet nut tool, install the rivet nuts.

    Insert the wire rope into the swage stud terminal ends at each end of your run. These fittings require a hydraulic swaging tool. Crimp the swage terminals onto the wire.

    Insert the RHT swage stud terminal into the RHT rivet nuts . Do vice versa for the LHT fittings. Thread with hands first and tension the swage stud terminals with a spanner.

    More Information
    Product Material Stainless Steel
    Swaging System Hydraulic Swaging
    Wire Rope Diameter 3.2mm
    Product Specifications
      Swage Stud Terminals
      Choose from:
    • 1x Swage Stud Terminal for 3.2mm Wire M6 RHT, 48mm Thread, 100mm Overall Length
    • 1x Swage Stud Terminal for 3.2mm Wire M6 LHT, 48m Thread, 100mm Overall Length
    • 1x Rivet Nut M6 RHT Large Flange SS304
      • Outer diameter: 8.9mm
      • Flange diameter: 12.9mm
    • 1x Rivet Nut M6 LHT Large Flange SS304
      • Outer diameter: 8.9mm
      • Flange diameter: 12.9mm
    Stock Availability In Stock
    Bulky item No
    4.7 rating from 35 reviews