Flip Lock Stainless Wire Balustrade Kit

Flip Lock Stainless Wire Balustrade Kit #100

Flip Lock Stainless Wire Balustrade Kit #100

From $14.30

To $22.20

A staff favourite, the Flip Lock system allows you to create neat, streamlined wire runs between existing metal posts. No more rivet nuts needed! Used with M6 threaded fittings such as swage stud terminals for 3.2mm wire.

In stock

SKU
WB-FLN32-K100
Flip Lock Nut RHT M6 x 30mm Stainless Steel 316   + $0.00
Flip Lock Nut LHT M6 x 30mm Stainless Steel 316   + $0.00

Maximum 512 characters

For DIY purchase the wire separately here

For Factory Swaging wire the wire is purchased separately here:
7x7 3.2mm (most economical, higher stretch, rough weave)
1x19 3.2mm (stronger, least stretch, higher break load, smooth finish)

To calculate the amount of wire required:

Post-to-Post measurement x Number of runs

Example 1
Section 1: 11 runs x 3450mm; 37,950mm
Section 2: 11 runs x 5350mm; 58,850mm
Total Wire 96,800mm = 96.8 metres.
Add 97m to your order (Total Rounded Up)

Please Note: Any leftover/offcut wire for factory swaging will not be supplied. Any additional wire required should be purchased/ordered separately.

Current Factory Swaging Lead Time: 1 week

Flip Lock Stainless Wire Balustrade Kit
Flip Lock Stainless Wire Balustrade Kit #100

In stock

$14.30

Items Included:

    The Flip Lock Nut combined with a Swage Stud Terminal allows you to create neat, streamlined wire runs between existing metal posts. There is no design on the market like it. It eliminates the requirement for installing rivet nuts and rivet nut tools. All you require is a Flip Lock Nut RHT, swage stud terminal RHT, and then the same LHT fittings at the opposite end of the run. Used with M6 threaded fittings such as swage stud terminals for 3.2mm wire.

    The complete Flip Lock System consists of the following components:

    • Flip Lock Nut RHT M6 x 30mm
    • Flip Lock Nut LHT M6 x 30mm
    • Swage Stud Terminal RHT M6
    • Swage Stud Terminal LHT M6
      More Information
      Product Material Stainless Steel 316
      Swaging System Hydraulic Swaging
      Wire Rope Diameter 3.2mm
      Product Specifications Flip Lock Nut
      • M6 thread
      • 30mm length
      • Marine Grade Stainless Steel 316
      Swage Stud Terminal
      • M6 thread
      • Choose from fittings for 3.2mm wire
      • Marine Grade Stainless Steel 316

      *D1/D are incorrect in the diagram.
      D1: 8mm (drill 8.5mm hole)
      D: 9.5mm

      Stock Availability In Stock
      Bulky item No
      4.7 rating from 35 reviews