DIY kit for 3.2mm wire rope, features 2qty Black PVD coated Jaw & Swage Rigging Screw Turnbuckles and 2qty Black PVD coated Lag Eye Screws to fasten to timber posts. Not suitable for use in beachfront properties or areas subjected to salt spray.
Black Stainless
Straight & Angled Sections
A simple to install, very popular stainless wire balustrade kit for fixing between timber posts. Suitable for flat sections or angled (such as stairs).
The extra bottlescrew helps create more tension, thus this kit is suitable for longer runs such as 10 metres or over.
For fixing long timber runs, this kit features 2x Black PVD Jaw & Swage Rigging Screw Turnbuckles 1/8" (3.2mm) and 2qty Black PVD M6 x 60mm Lag Eye Screws at each end.
Perfect to use with our 3.2mm 7x7 and 1x19 wire rope
All in blackened stainless steel , these fittings require hydraulic swaging/crimping with an entry level 5T light duty hydraulic swaging tool (see notes below on the use of tools and hardened dies) or via a 30T Hydraulic Swaging Press.
Factory Hydraulic Swaging is recommended for this kit - please enquire for availability and pricing.
The stainless swage terminals create a neat, streamlined wire rope run.
Also recommended is the multi tool spanner to simply and easily adjust the tensioners.
Please note the use of hardened dies, heavy duty hydraulic swaging tools (including the 8T and 12T hydraulic tools) and other swaging procedures are not recommended as it will impact the finish of the final product and are not covered under standard product warranty.
DO NOT USE in saline/salt prone environments especially areas subjected to salt spray from the coast. Any use within this environment will corrode the finish which cannot be rectified and will void any warranty. If your project is subject to this kind of environment, please contact us for clarification and alternative options.
Avoid using harsh cleaners, chemicals and abrasives on and around the BlackLine wire and fittings. The blackened surface of the stainless steel may be stripped off, discoloured or degraded.
AVOID acid based cleaners such as oxalic acid (deck cleaner), vinegar or InnoShine B570 / InnoGel B450.
USE a mild, pH neutral cleaner, such as orange citrus or mild detergent with a non-abrasive cloth.
| Product Material | Blackened Stainless Steel |
|---|---|
| Swaging System | Hydraulic Swaging |
| Post Fixing Material | Timber |
| Section Type | Straight Sections, Angled Sections (eg. Stairs / Ramps) |
| Wire Rope Diameter | 3.2mm |
| Product Specifications |
|
| Bulky item | No |
Known Incompatible Products
DO NOT USE in saline/salt prone environments especially areas subjected to salt spray from the coast. Any use within this environment will corrode the finish which cannot be rectified and will void any warranty. If your project is subject to this kind of environment, please contact us for clarification and alternative options.
Avoid using harsh cleaners, chemicals and abrasives on and around the BlackLine wire and fittings. The blackened surface of the stainless steel may be stripped off, discoloured or degraded.
AVOID acid based cleaners such as oxalic acid (deck cleaner), vinegar or InnoShine B570 / InnoGel B450.
USE a mild, pH neutral cleaner, such as orange citrus or mild detergent with a non-abrasive cloth.
