BlackLine Stainless Wire Rope 1x19 3.2mm Stainless Steel (Black) 50 Metres

BlackLine stainless steel wire rope. In understated black for a modern wire balustrade or espalier system.

Combine with BlackLine Wire Balustrade Kits and Black Posts to bring the new, popular style of balustrading to your home.

Commonly used used for wire balustrading, trellis/espalier systems and architectural applications, 3.2mm 1x19 stainless steel wire rope is the strongest of the standard wire rope constructions. It has over 800KG of break load.

It also has the least stretch over the same tension, compared with other constructions. As a result, over time you won't have to tension the wire as much, or run out of tension capability with your installed wire tensioners.

1x19 wire requires hydraulic crimping. It is commonly used with stainless swage fittings such as bottlescrews and swage terminals. It is the least flexible and does not allow for kinks or bends.

**Warning, please note **

DO NOT USE in saline/salt prone environments especially areas subjected to salt spray from the coast.  Any use within this environment will corrode the finish which cannot be rectified and will void any warranty. If your project is subject to this kind of environment, please contact us for clarification and alternative options.

Avoid using harsh cleaners, chemicals and abrasives on and around the BlackLine wire and fittings. The blackened surface of the stainless steel may be stripped off, discoloured or degraded.

AVOID acid based cleaners such as oxalic acid (deck cleaner), vinegar or InnoShine B570 / InnoGel B450.

USE a mild, pH neutral cleaner, such as orange citrus or mild detergent with a non-abrasive cloth.