Decking Screws 12 Gauge 65mm Torx Stainless Steel 304 - 1000qty

Typically for wider boards around 135-140mm, presenting Torx Drive 12G x 65mm stainless steel decking screws for fastening 19-25mm thick hardwood or softwood timber boards.

Torx drive is superior drive type, which tightly engages the decking screw resulting in less camming out and subsequent head burring/rounding out.

Our stainless steel torx drive decking screws range from 10G to 12G, 304 to 316 stainless, as well as 14G with a trim head (12G diameter size) for heavier boards.

If you've heavier boards then you can look at Batten Screws which are often used in place of decking screws. They're stronger and usually higher gauge (12G or 14G) and are more able to withstand environmental conditions can bend or cup natural timber.

Made from solid stainless steel 304 which is generally suitable for areas more than 300 metres from the ocean. Saline environments are highly corrosive and stainless steel 316 screws should be seriously considered for marine and beachfront applications.

These decking screws are suitable fixing a softwood or hardwood deck inland from the coast or it is not subjected to extensive pooling of water.

We've supplied thousands of DIYers, carpenters and builders with timber decking screws for fixing timber to timber including hardwood to softwood, or hardwood to hardwood. /p>

Pre-drilling and countersinking when fixing hardwood boards to hardwood joists (or even softwood joists) is essential to ensure a smooth installation. Stainless steel is a softer metal and will more easily snap or heads will burr when encountering too much friction and resistance. A tool such as the CARBITOOL Pro Series 12 Gauge Pre-Drilling and Countersinking Tool or the SMART-BIT for pre-drilling and countersinking in one action will assist you to install the screws and also leave a nice clean finish.

Check out this video of the SMART-BIT pre-drilling/countersinking tool in action.

Pre-Drilling and Countersinking

Building a deck is a reasonably time consuming process and with the repetitive tasks of driving in screws and pre-drilling/countersinking you want to be doing it right the first time. The SMART-BIT and CARBITOOL pre-drilling tools help in a number of ways:

• The drill holes provide a guide for the screws so they'll drive in straight each and everytime.
• The depth collar enables you to pre-drill to the same depth everytime, avoiding the hassle screws sitting as different depths in your timber.
• The SMART-BIT also helps you to avoid splitting your timber boards that may occur when driving screws in without pre-drilling, particularly at end of the board.
• The SMART-BIT also helps you to avoid untidy, and potentially hazardous (for bare feet) frayed splinters around the screw head.