CARBITOOL Countersink and Drill 4.0mm (12 Gauge)

The CARBITOOL Professional Series Countersink and Drilling Tool is the leader in the Australian market, specifically designed for pre-drilling and countersinking thousands of screws for decking and workworking purposes.

Co-developed with Better Hardware, CARBITOOL now have a complete range of carbide tipped countersinking tools for use with our 8, 9, 10 gauge decking screws and 14 gauge batten screws.

• Carbide tipped countersink - has been reported to last up to 10x longer than your standard HSS countersink bits (ie. SMART-BITs, CleverTools etc). This means you can churn through thousands of screws without needing to replace the tool - and you can even get the countersink sharpened.
• Unique! - Fully adjustable countersink depth - Yes! Finally, you can adjust the depth of the countersink, so no matter what brand of screws you have, or what your preference is, you can enlarge or reduce the countersink depth
• Unique! - Built-In Measurement Guide - Measure the exact mm countersink depth for each type of screw you commonly use!
• Fully adjustable drill depth - You can adjust the depth of the drill bit so that you only pre-drill the decking board, or if you're driving into hardwood joists you can pre-drill the fully depth of the screw. This will practically eliminate any friction the screw may otherwise encounter, reducing the likelihood of snapped screws.
• Depth Stop Collar - No more estimating the depth ofhte countersink - the spinning collar will stop spinning once it hits the timber board and prevents the countersink and drill from going any further. This gives you a uniform depth and finish for all your screws, ever single time.
• Ball bearing depth stop with delrin cap eliminates scoring and burning on the workpiece
• Value for money - For anyone considering building a deck of 2000+ screws, we'd thoroughly recommend you grab one of these tools.
• Professional Series - Carpenters and decking contractors will love this tool as it will last for ages