$6.39
Very popular, neat and versatile Espalier/Trellis DIY kit for 3.2mm wire rope. Perfect for both straight or angled sections between timber posts or out from timber walls. The fittings pivot on the lag eye screws, which help the wire to autocorrect into a level position or exactly to the angle required. Requires hydraulic swaging.
316 Stainless
Perfect for fixing wire rope runs between timber end posts, beams or out and across timber walls, this exceptionally popular streamlined Espaliex kit features a Jaw/Swage Bottlescrew M5 x 3.2mm, a Fork Terminal M5 x 3.2mm and 2qty M6 x 60mm Lag Eye Screws or 2qty M6 x 40mm Lag Eye Screws.
Apart from its inherent neat and sleek appearance, the two major benefits with this massively popular system are ease of installation and versatility. We would argue is it one of the easiest espalier/trellis kits to install. The pivot point provided by the lag eye screws for the bottlescrew gives you the flexibility for use on flat sections of wire rope runs as well as for angled (stair) sections. Even if you don't drive the lag eye screws in perfectly straight, the bottlescrew and fork terminal will pivot and adjust to give you a straight run. In comparison some other systems require you to install the fittings completely straight and square or risk wire runs with unsightly angles.
Suitable for 3.2mm wire including 7x7, 1x19 and 7x19 constructions. Because 1x19 wire rope has a higher tensile strength, has the least amount of stretch and is less flexible than 7x7 and 7x19, it is very commonly used with stainless swage fittings such as with this kit. 1x19 wire is also more aesthetically pleasing than 7x7 or 7x19, it's smoother due to its helical (spiral) construction and as such can physically accommodate more wire in the 3.2mm than other constructions.
All in stainless steel 316, these fittings require hydraulic swaging/crimping, such as with an entry level 5T light duty hydraulic swaging tool or more easily with an 8T heavy duty hydraulic swaging tool. Please note: wire is not included in this kit and can be purchased separately here.
You can do it all yourself by hiring the 30T Hydrualic Swaging Press (Melbourne only), or by purchasing one or a light duty hydraulic swaging tool.
It's recommended to use a purpose built lag eye screw driver bit to easily drive the lag eye screws into your timber posts (pre-drilling recommended).
Also recommended is the bottlescrew spanner to simply and easily adjust the bottlescrew tensioners.
| Product Material | Stainless Steel 316 |
|---|---|
| Swaging System | Hydraulic Swaging |
| Post Fixing Material | Timber |
| Wire Rope Diameter | 3.2mm |
| Product Specifications |
|
| Stock Availability | In Stock |
| Bulky item | No |
Known Incompatible Products
Known Incompatible Products
