Espaliex Trellis Wire Line Kit for Timber : Kit #E61s
From$24.01
To$24.73
This is one of the most elegant, slimline DIY espalier/trellis kits available in the market. If you want the least visual bulk less the price tag shock, then have a look. For flat runs between timber posts, beams or out and along timber walls. Hydraulic swaging/crimping required.
A staff favourite, this stainless wire espalier/trellis kit is slimline, neat and aesthetically pleasing. It's designed to minimise the visual impact of your espalier wire. It is quite easy to install , reducing the 'hidden' labour cost of some of the lower cost systems available. Suitable for timber stairs, ramps and runs off timbers walls.
See #E61 for a straight line version. (This straight line version won't be able to be used on walls and is only suitable for straight wires between posts or beams.)
DIY Install Instructions
Using a 13mm countersink bit, countersink the posts for your threaded timber inserts
Pre-drill your post holes for the threaded inserts using a 9.5mm drill bit.
Insert the wire rope into the swage stud terminal ends at each end of your run.
Crimp the swage terminals onto the wire. These fittings require the use of a hydraulic swaging tool.
Insert the RHT swage stud terminal into the RHT Pivot Point. Do vice versa for the LHT fittings.
Insert the RHT Pivot Point into the RHT Threaded Timber Insert. Do vice versa for the LHT fittings. Thread with hands first and tension the swage stud terminals with a spanner multi tool or spanner.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
