Factory Swaging Wire Rope 1x19 3.2mm AISI 316 - Per Metre

Only Sold for use with Factory Swaging Wire Balustrading Kits.
Cannot be purchased for any other purpose.
If you are not getting Factory Swaged Wire Balustrading Kits look here for the wire.

To determine the amount of wire:
Post-to-Post measurement x Number of runs

Example 1
Section 1: 11 runs x 3450mm; 37,950mm
Section 2: 11 runs x 5350mm; 58,850mm
Total Wire 96,800mm = 96.8 metres.
Add 97m to your order (Total Rounded Up).

Please Note: Any leftover/offcut/over-quantity wire than required for factory swaging will not be supplied. Any additional wire required should be purchased/ordered separately using these products.

Features:

Marine Grade Stainless Steel AISI 316 has the highest corrosion protection, making this wire rope perfect for highly corrosive environments including beachfront properties and marine environments with high salinity levels.  Commonly used for wire balustrading, trellis/espalier systems and architectural applications, 3.2mm 1x19 stainless steel wire rope is the strongest of the standard wire rope constructions. It has over 800KG of break load.

It also has the least stretch over the same tension, compared with other constructions. As a result, over time you won't have to tension the wire as much, or run out of tension capability with your installed wire tensioners.

1x19 wire requires hydraulic crimping. It is commonly used with stainless swage fittings such as bottlescrews and swage terminals. It is the least flexible and does not allow for kinks or bends.