Wire Balustrade Kit #97 – Jaw/Swage Mini System (Metal)
$7.65
If you have a short wire rope section (approximately 2000mm or less) on a staircase between metals posts, or where the wire exits the post at an angle, then this tidy little wire balustrade system may be just the ticket. Not only are the fittings minified, but they're versatile and pivot to level or adjust to the required angle. It's just so neat!
If you have a short wire rope section (approximately 2000mm or less) on a staircase between metals posts, or where the wire exits the post at an angle, then this tidy little wire balustrade system may be just the ticket. Not only are the fittings minified, but they're versatile and pivot to level or adjust to the required angle. It's just so neat!
Features a Mini Jaw & Swage Bottlescrew M5 x 3.2mm, a Mini Fork Terminal M5 x 3.2mm and M6 Mini Eye Bolts (RHT).
Suitable for 3.2mm wire including 1x19 and 7x7 constructions. Because 1x19 wire rope has the least stretch has a higher tensile strength but it inflexible, it requires stainless swage fittings such as with this kit. 1x19 is smoother and more aesthetically pleasing than 7x7 or 7x19 making it the best wire choice for this system.
All in stainless steel 316, these fittings require hydraulic swaging/crimping, such as with our Light Duty Hydraulic Swaging Tool or 8T Hydraulic Swaging Tool. Also available for hire and purchase is the OPT 30 Tonne Press (hire Melbourne only).
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
