From $10.90
To $12.38
316 Stainless
Straight Sections
Perfect for running wire between existing metal posts, this stainless steel wire rope balustrade kit is slimline, neat and aesthetically pleasing. This kit is for those who are looking to minimise balustrade wire fitting bulk, for 10M+ runs. Suits metal posts of applicable wall thickness.
Different length Rivet Nuts available to suit different wall thicknesses of metal posts. See product options (selections) above.
For the matching stair/ramp kit see Kit #62s (requires M6 LHT capable Rivet Nut Installation Tool, see Kit #62s for more info). For matching single-tensioner bottlescrew systems see Kit #73. For an alternative look see Kit #62 (require M6 LHT capable Rivet Nut Installation Tool, see Kit #62 for more info).
Pre-drill your post holes for the rivet nuts.
Using a rivet nut tool, install the rivet nuts. Important! The tool must support the installation of M6 RHT Rivet Nuts.
Cut your wire. Thread it through the intermediate posts.
Insert the wire rope into the swage stud bottlescrew end and crimp using a hydraulic swaging tool. Do the same for the other swage stud bottlescrew end.
Thread the swage stud bottlescrew thread into the rivet nut. Do the same for the other swage stud bottlescrew end. Thread with hands first and tension the swage stud bottlescrew with a bottlescrew spanner.
| Product Material | Stainless Steel 316 |
|---|---|
| Swaging System | Hydraulic Swaging |
| Post Fixing Material | Metal |
| Section Type | Straight Sections |
| Wire Rope Diameter | 3.2mm |
| Product Specifications |
|
| Stock Availability | In Stock |
| Bulky item | No |
Known Compatible Products
Known Incompatible Products
