A super neat and versatile stainless wire balustrade kit for areas supported with timber or metal posts. Comprises a swage stud terminal, hex socket tensioner, dome rod terminal and bevelled washers
Insert the wire rope into the swage fittings at each end of your run. These fittings require a hydraulic swaging tool.
Insert the swage stud terminal into the hex socket tensioner and tighten with an allen key.
For angled sections such as stairs, the 8mm x 37 degree bevelled washer supports the Hex Socket Tensioner. This results in a smooth, seamless wire balustrade run.
For a Horizontal Section version (Kit #464) click here
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.