Swageless Espalier Trellis Wire Line Kit for Timber : Kit #E67
$22.22
The ultimate timber-to-timber post or beam wire espalier system. Sleek and slimline. They don't come much easier to install than this. No swaging/crimping required, nor any special installation tools; you only need to drill holes in your posts. **Unlocking key (essential) sold separately.**
The ultimate timber-to-timber post or beam wire espalier/trellis system. Sleek and slimline. They don't come much easier to install than this. No swaging/crimping required, nor any special installation tools; you only need to drill holes in your posts. **Unlocking key (essential) sold separately.**
Suits 3.2mm stainless wire rope (sold separately)
Includes:
1x Rapid Lock Swage Stud Terminal M6 x 35mm RHT for 3.2mm Wire AISI 316
1x Rapid Lock Swage Stud Terminal M6 x 35mm LHT for 3.2mm Wire AISI 316
1x Threaded Timber Insert M6 Right Hand Thread AISI 316
1x Threaded Timber Insert M6 Left Hand Thread AISI 316
In addition to this wire espalier/trellis kit, it's essential to purchase the 'unlocking key'. If you need to pull the wire out and re-cut it, you can unlock the wire from the Rapid Lock terminal using the separately purchased Rapid Lock Key available here. After you've inserted the wire into the rapid lock terminal, you can remove it by gently inserting the key. You might need to do this if you need to re-cut the wire to a shorter length.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
