Rapid Lock Swageless Stud Terminal M6 x 35mm LHT for 3.2mm Wire AISI 316
$8.48
The Rapid Lock Wire swageless studs allows easy installation of guide wires for balustrades, blinds and awnings. It suits 3.2mm stainless wire rope (1x19 recommended). DIY friendly. Simple installation. Does not require any swaging/crimping.
Used in wire balustrades, blinds and awnings the Rapid Locks external dimension of only 9mm, its slimline form is compatible with most existing wire guide bottom rail eyes. This slimline system also makes the possibility of lowering the bottom rail to floor level much easier. It can only be used with 3.2mm stainless wire rope. It works most effectively with the 1x19 wire construction.
Note: Additional M6 Hex or Nylock Nut required to lock the top Rapid Lock Stud threads.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
