Wire Balustrade Kit #51 – Eye/Hook System (Timber & Metal)
From$4.99
To$5.23
DIY stainless wire balustrade kit is perfect for fixing 3.2mm stainless steel 316 wire rope to timber or metal posts. Designed for fixing 7x7 or 7x19 3.2mm wire
This DIY stainless wire balustrade kit is perfect for fixing 3.2mm stainless steel 316 wire rope (available from our website in a number of different reel sizes) to timber posts.
Suitable for wire rope runs less than 10 metres, between timber posts.
To determine the wire length required, measure the internal post-to-post measurement. Then cut the wire 60mm shorter than the measurement. For example, if your internal post-to-post measurement is 2000mm, your wire length will be 1940mm.
1x19 wire is unsuitable for looping around thimbles. A more flexible wire, either 7x7 (most common) or 7x19 must be used.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
