This popular wire balustrade system is versatile and designed for fixing 4.0mm wire rope to timber posts or metal posts. Designed for fixing 7x7 or 7x19 4.0mm wire.
For Metal Posts: With the rivet in the saddle recess, the thickness is approximately 1.1mm. So please add this amount to your post thickness when considering which rivet size. eg. For a post thickness of 2.5mm: 1.1mm + 2.5mm = 3.6mm minimum grip range (5-3 rivet or above).
1x19 wire is unsuitable for looping around thimbles. A more flexible wire, either 7x7 (most common) or 7x19 must be used.
Please Note: Images pictured are for 3.2mm wire and fittings however they depict the 4.0mm wire fittings reasonably accurately.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
