Wire Balustrade Kit #32 – Jaw/Jaw System (Timber & Metal)
From$9.24
To$10.12
This DIY stainless wire balustrade kit is perfect for fixing 3.2mm 7x7 or 7x19 stainless steel 316 wire rope to timber or metal posts. Suitable for wire rope runs more than 10 metres. Designed for fixing 7x7 or 7x19 3.2mm wire
This DIY stainless wire balustrade kit is perfect for fixing 3.2mm stainless steel 316 wire rope (available from our website in 50M, 100M, 200M, 305M and 1000M reels) to timber or metal posts.
Suitable for wire rope runs more than 10 metres.
The saddle recesses neatly accommodate the countersunk self tappers providing a clean finish.
1x19 wire is unsuitable for looping around thimbles. A more flexible wire, either 7x7 (most common) or 7x19 must be used.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
For technical requirements where you are unsure what products are and are not compatible please Contact Us.
Please note these are general Compatibilities/Incompatibilities, we cannot provide advice as to whether these components will meet the technical/structural requirements of your project. For this type of information you will need a builder, engineer or other qualified professional to assess your site and needs.
